搜索
8383体育·(中国)官方网站
全部分类
联系我们
地址：深圳市宝安13区宝民一路宝通大厦1009--1010室
电话：
0755-27809908/27832521
0755-27833241/27833242
微型电容位移传感器
微型电容位移传感器
AFP-250M-CTR/SE* AFP-500M-CTR/SE
产品描述
产品参数
产品规格
产品尺寸
型号
微型电容位移传感器
AccumeasureTM Capacitance Probes for AccumeasureTM D series
MTI Instruments Flat Capacitance Probes for Grounded Targets
MTI’s flat capacitance probe series. The thin probes may be used as is or bonded to a flat plate with mounting holes. Applications include single ended and double sided gap measurement such as commutator gaps, automotive and aviation assemblies.
Optionally, probes can be ordered bonded to a flat steel plate with 4X countersunk screw holes for conventional fastener attachment
General Specifications for Flat Probes
Push Pull Flat Probes for Ungrounded Targets
Standard capacitive sensors require the target to be electrically grounded. Current flows from the probe face to the target and back to the amplifier to complete the circuit. The capacitance between probe and target is proportional to the distance and converted to a 0 - 10V output from the amplifier. The measurement of electrically grounded targets can be, however, affected by changes in the electrical conductivity or ground path of the target.
To eliminate the effects of these variations, MTI developed a unique version of the Accumeasure sensor called the push-pull. In this design each probe consists of two capacitance sensors, built into one probe body. Each sensor is driven at the same voltage; however, there is a 180 degree phase shift between signals. This shift allows the current path to travel across the target surface rather than through the target to ground, eliminating any inaccuracies created by poorly grounded targets.
To eliminate the effects of these variations, MTI developed a unique version of the Accumeasure sensor called the push-pull. In this design each probe consists of two capacitance sensors, built into one probe body. Each sensor is driven at the same voltage; however, there is a 180 degree phase shift between signals. This shift allows the current path to travel across the target surface rather than through the target to ground, eliminating any inaccuracies created by poorly grounded targets.
General Specifications for Flat Push Pull Probes
Optional Accessories
Probe Recommended Stand-off Ranges
Optional Accessories
Flat probes can be bonded back to back and inserted into a handle (8000-6443) or used stand-alone to make thin gap probes. Additionally, a shim may be bonded between the probes for added stiffness.
Contact MTI sales with your requirements for measuring roller or die slots.
Contact MTI sales with your requirements for measuring roller or die slots.
MTI has custom capability to design and manufacture a variety of probes to suit unique applications. This flat probe design capability allows for relatively inexpensive probes when produced in quantity.
MTI’s back-to-back push-pull probes can work as gap probes on ungrounded targets. These probes require a four channel amplifier such as the Digital Accumeasure D400 to operate.
Unmounted Probe Bonding Instructions
The probes can also be bonded back to back on a thin SS tab for insertion into slots or gaps.
关键词:
微型电容位移传感器
-
扁平式电容位移传感器.pdf
大小：2021-09-09 14:24:38
深圳总部：深圳市宝安13区宝民一路宝通大厦1009--1010室
公司电话：0755-27809908/27832521/27833241/27833242
友情链接 | 慧聪网 振联科技有限公司 德国RUFF绕线机
版权所有：8383体育·(中国)官方网站 粤ICP备11081758号 网站建设：中企动力 深圳